Flipper Wi-Fi Dev Board (ESP32-S2): hold BOOT, tap RESET, release BOOT, then click Connect.
Other ESP32 boards: if Connect fails, hold the board's BOOT button while you click Connect.
Use a USB data cable plugged straight into the computer. Charge-only cables won't work.
Close anything else using the port: Arduino IDE, serial monitors, qFlipper, other flasher tabs.
You don't have to pick a model. The chip that answers decides which firmware is used, whatever is selected.
Firmware filesWaiting for board
Advanced options
Writing…0%
Console
Want to run a third-party Flipper app that isn't bundled with FoxFW? Try the FAP Compiler — paste a GitHub URL, no toolchain install needed.
- FoxFW and its affiliated contributors disclaim any liability for damages, misuse, or unintended consequences resulting from the use of this firmware tool or the flashing of firmware onto your device.
This page keeps an anonymous count of installs (chip, firmware version, country) and shows it under Statistics above. No IP addresses or personal data are stored.
Built on esptool-js (Apache-2.0, Espressif Systems). Requires a browser with Web Serial support (Chrome/Edge).